perm2gc
08-24 10:22 PM
If I were you, I would read the "captions" before responding.:mad: come out of box dude
abhishekhp
11-24 02:04 PM
You should be fine to go ahead start processing you new EB2 based position under EAD. As mentioned in other posts here you do have to start over i.e file a new labor for the position under PERM and an I-140 to qualify under EB2. However you can port your PD while you are filing for theEB2 I-140 by attaching a copy of your previous EB3 I-140 approval notice. Also you need not reapply your I-485 as you can go ahead and do 'INTERFILING' basically letting the USCIS know to process the existing I-485 using your EB2 I-140 approval if its PD is current.
Hope that helps. Good luck !!!
Hope that helps. Good luck !!!
chanduv23
06-19 10:15 AM
Here is a recap from Murthy bulletin
USCIS Errors in Denying a Case
AILA Liaison requested that, where the USCIS denies a case in error, then the filing fee for a Motion to Reopen or appeal should be waived. It was suggested that the Ombudsman�s office needs to intervene in emergency cases, where time is of the essence.
Although the Ombudsman's office cannot adjudicate or approve a case, it believes that these channels may help in obtaining resolution via internal communications that recommend specific solutions.
It is important that the entire process with USCIS be followed in terms of filing the appeal or motion to reconsider (MTR) or other process. The CIS Ombudsman's office may attempt to intervene to resolve particular matters, but the individual or employer needs to follow the particular agency's guidelines and not miss any deadline or assume that the Ombudsman will resolve all legal concerns within a particular timeframe.
Folks - if we are not willing to help ourselves, we will have to go through these burden. So plese come forward.
If Authorities know about issues that are common and widespread - then necessary steps will be taken to correct them - otherwise we are all bound to suffer
USCIS Errors in Denying a Case
AILA Liaison requested that, where the USCIS denies a case in error, then the filing fee for a Motion to Reopen or appeal should be waived. It was suggested that the Ombudsman�s office needs to intervene in emergency cases, where time is of the essence.
Although the Ombudsman's office cannot adjudicate or approve a case, it believes that these channels may help in obtaining resolution via internal communications that recommend specific solutions.
It is important that the entire process with USCIS be followed in terms of filing the appeal or motion to reconsider (MTR) or other process. The CIS Ombudsman's office may attempt to intervene to resolve particular matters, but the individual or employer needs to follow the particular agency's guidelines and not miss any deadline or assume that the Ombudsman will resolve all legal concerns within a particular timeframe.
Folks - if we are not willing to help ourselves, we will have to go through these burden. So plese come forward.
If Authorities know about issues that are common and widespread - then necessary steps will be taken to correct them - otherwise we are all bound to suffer
dpp
02-21 01:15 PM
May be there is some problem with your system. It was updated in the morning only and we are all getting the latest one. Please clear cache and try again.
I saw that in morning , trust me its one of those things I do on my laptop everyday in the morning.
I try to access the page now and it shows the old one ...hehe :mad: ..
Hopefully they are in the process of correcting/retracting ...
I saw that in morning , trust me its one of those things I do on my laptop everyday in the morning.
I try to access the page now and it shows the old one ...hehe :mad: ..
Hopefully they are in the process of correcting/retracting ...
more...
saketkapur
09-16 05:25 PM
done
CNN=Corrupt Naitivist Network
CNN=Corrupt Naitivist Network
gc_on_demand
05-05 09:54 AM
If this happens it will be a bad news as given environment I 140 approval takes years . Very soon there will be a backlog in I 140 stage.. They are just swaping backlog from one stage to another..
more...
ujjvalkoul
01-17 03:11 PM
Hi
I received my EAD card but the expiry date is 01/08/08....it was approved on 01/11/2008.....
So they goofed up as usual.....I called them and they are asking to file another 765 with
Orig EAD card and copy of approval notice...
Is the approval notice the letter that comes with your EAD card?
Has anyone faced this..any pointers would help..........
They also asked me to book an infopass appt to see if they can issue an interim EAD...or something...This really sucks...
I received my EAD card but the expiry date is 01/08/08....it was approved on 01/11/2008.....
So they goofed up as usual.....I called them and they are asking to file another 765 with
Orig EAD card and copy of approval notice...
Is the approval notice the letter that comes with your EAD card?
Has anyone faced this..any pointers would help..........
They also asked me to book an infopass appt to see if they can issue an interim EAD...or something...This really sucks...
sgorla
02-20 04:51 PM
If you filed in PERM system, you should be able to find your case. I was able to see my case based on the LC case number. DOL has database for fiscal years 2003 thru 2006.
This is useful, but I doubt its accuracy because some of the cases I know - including mine - are missing !!
This is useful, but I doubt its accuracy because some of the cases I know - including mine - are missing !!
more...
sparky_jones
10-05 10:49 AM
Never knew that spouse had to be included in the I-140 stage... Is this a new rule?
No, this is basically the left arm of the government not knowing how the right arm does its business.
No, this is basically the left arm of the government not knowing how the right arm does its business.
leoindiano
08-03 12:22 PM
what to you mean by 485 fingerprinting?
Is it just getting it done or any other issue relating to this...
Just getting it done...Some os us didnt get notice at all
Is it just getting it done or any other issue relating to this...
Just getting it done...Some os us didnt get notice at all
more...
KVHTMBA
01-11 01:12 PM
Good to see this bill and it will be great if it is passed even with less than 60% allocation from the lottery program. I don’t think they would completely eliminate lottery program and the lottery program might have their own advocacies. As mentioned in this thread they might have the lottery program for many reasons. I am hoping for the bill to pass as it is :-)
Regarding satyasrd’s question I think section 2 . line #15 thru #19 in the bill (I copied the text below) helps who obtain the advanced degree in USA before 01/05/2011 (preceding the date of the petition) and obtain the degree within 5 years you should be good to go. Others please correct me if I am wrong.
15 ‘‘(ii)(I) obtained such degree within
16 the United States during the 5-year period
17 preceding the date on which the petition
18 filed under section 204(a)(1)(F) for
19 classification under this subparagraph is filed;
Regards,
KVHTMBA
Regarding satyasrd’s question I think section 2 . line #15 thru #19 in the bill (I copied the text below) helps who obtain the advanced degree in USA before 01/05/2011 (preceding the date of the petition) and obtain the degree within 5 years you should be good to go. Others please correct me if I am wrong.
15 ‘‘(ii)(I) obtained such degree within
16 the United States during the 5-year period
17 preceding the date on which the petition
18 filed under section 204(a)(1)(F) for
19 classification under this subparagraph is filed;
Regards,
KVHTMBA
bb20078
10-10 09:20 AM
I also want to know the answer to this question
Can you re enter USA on H4 after using EAD
On the immigration form at the port of entry, can you put H4 and say YES to do you work?
Can you re enter USA on H4 after using EAD
On the immigration form at the port of entry, can you put H4 and say YES to do you work?
more...
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
rsharma
07-24 06:58 PM
rsharma:
For many of the applications filed during the 2007 "visa-gate" visas are not available to allow USCIS to approve the applications. However, USCIS is in the process of doing what they can to get these applications ready to be approved once a visa becomes available.
So the idea is that for many of these applications USCIS has already decided that they are approvable but for the fact that a visa is not available, and once a visa becomes available, they will approve them. Hence the idea that they are "pre-adjudicated".
Thank you attorney Sauer and all other IV members for replying to my question.
I am little confused at the reply I received from USCIS. They are saying that my application cannot be adjudicated till visa numbers are available.
Do they mean they will not pre adjudicate my case till visa number is available ?
or
Do they mean that pre adjudication is done, but the visa number assignment process (adjudication) will be done once visa number is avalable?
The processing dates are passed my received date and notice date in the processing center where my application is processed.
Please let me know your thoughts.
For many of the applications filed during the 2007 "visa-gate" visas are not available to allow USCIS to approve the applications. However, USCIS is in the process of doing what they can to get these applications ready to be approved once a visa becomes available.
So the idea is that for many of these applications USCIS has already decided that they are approvable but for the fact that a visa is not available, and once a visa becomes available, they will approve them. Hence the idea that they are "pre-adjudicated".
Thank you attorney Sauer and all other IV members for replying to my question.
I am little confused at the reply I received from USCIS. They are saying that my application cannot be adjudicated till visa numbers are available.
Do they mean they will not pre adjudicate my case till visa number is available ?
or
Do they mean that pre adjudication is done, but the visa number assignment process (adjudication) will be done once visa number is avalable?
The processing dates are passed my received date and notice date in the processing center where my application is processed.
Please let me know your thoughts.
more...
kminkeller
03-09 01:00 PM
Hi I am very new to this forum and actually to all the Immigration related forums. Here is what my situation is.
I was working for a company A, got my PERM and I140 approved on EB3 and filed my I485 on with PD August 2007. I have also have the EAD and AP and am working on EAD as my H1 got voided after getting laid off from Company A on 2009. I am working with a company B with a higher salary than company A. This company didnt want to deal with USCIS and my agreement with this company does not allow me to discuss immigration matter with them. Now I got a new offer from company C with similar or slightly higher salary. Company C is ready to do my paper work.
Now I need to know what are the things that I can do.
1. Do I need to file PERM, I140 again on EB2?
2. Do I need to file for H1 again and complete the entire process?
3. What is and how to do EB3 to EB2 porting? is that all I need to do?
Please give me some advice. Thanks in advance.
KM
I was working for a company A, got my PERM and I140 approved on EB3 and filed my I485 on with PD August 2007. I have also have the EAD and AP and am working on EAD as my H1 got voided after getting laid off from Company A on 2009. I am working with a company B with a higher salary than company A. This company didnt want to deal with USCIS and my agreement with this company does not allow me to discuss immigration matter with them. Now I got a new offer from company C with similar or slightly higher salary. Company C is ready to do my paper work.
Now I need to know what are the things that I can do.
1. Do I need to file PERM, I140 again on EB2?
2. Do I need to file for H1 again and complete the entire process?
3. What is and how to do EB3 to EB2 porting? is that all I need to do?
Please give me some advice. Thanks in advance.
KM
hemasar
06-22 09:38 AM
Due to time contraints doctor sent me for a chest x-ray and skipped the TB skin test. Chest x-ray came back negative. Question: Is a TB skin test required if a chest x-ray is negative? No remarks were made as to why TB skin test was not given. Should suggest, to a reasonable person, that no active TB is present
My colleague told me that he took only chest X-ray and not done skin test he got his GC.
My colleague told me that he took only chest X-ray and not done skin test he got his GC.
more...
mps
04-26 11:02 PM
Normally there should be a LUD on 485 after FP is done (same day/next)..
Gurus:
I don't see any LUD after my FP in November. My RD for 485 is July 02 1007.
However there was LUD on my approved I-40 in December 2007 (140 was approved in September 2006).
What could it mean possibly?
Reagrds,
Gurus:
I don't see any LUD after my FP in November. My RD for 485 is July 02 1007.
However there was LUD on my approved I-40 in December 2007 (140 was approved in September 2006).
What could it mean possibly?
Reagrds,
vagish
04-18 11:13 PM
--
Patience my lovelies. This may be the calm before the storm, who knows.
Per some news report, a debate has been scheduled on Senate floor to debate a comprehensive immigration reform bill during last two weeks of May'07
the other immigration bills are introduced by republicans, not with democratic support, so those bills are going no where. Only hope is STRIVE!!
thanks
Patience my lovelies. This may be the calm before the storm, who knows.
Per some news report, a debate has been scheduled on Senate floor to debate a comprehensive immigration reform bill during last two weeks of May'07
the other immigration bills are introduced by republicans, not with democratic support, so those bills are going no where. Only hope is STRIVE!!
thanks
gapala
02-24 12:24 PM
its depends ...
1) my and wife air ticket to india for visa stamping.
2) All visa fees
3) all hotel exp.
4) All attorney and USCIS fees .
but check with your CPA .
Jeezz.. travel to India? Is this personal or business travel? If business didn't you get paid for international travel?
I guess everything related to conducting your business can be itemized as tax deductable.
1) my and wife air ticket to india for visa stamping.
2) All visa fees
3) all hotel exp.
4) All attorney and USCIS fees .
but check with your CPA .
Jeezz.. travel to India? Is this personal or business travel? If business didn't you get paid for international travel?
I guess everything related to conducting your business can be itemized as tax deductable.
GCPagla
03-15 02:07 PM
Hi,
I would like to get you expert's opinion, before I pull the final string. My GC had been filed in EB2 with PD on Feb 26 2007. My 140 has been approved on April 2008. My 485 was filed during 2007 fiasco. I work for one of the big 3car company in Detroit as a consultant and situation is changing fast here, compelling me to search shelter somewhere else.
Luckily I got an offer from a new employer which is enticing me two pull the trick of Ac21. But before I do so, I would like to get your kind advise on the following points.
a) My Job title is programmer Analyst with my current employer but in the offer letter of the future employer is is given as "Sr. java developer". Does this title change matters? The new employer has agreed to give me the Ac21 letter with same job duty description.
b) The salary increase in the job is almost 50%. Do you think this causes any red flag.
c) The company size of the new employer is much small than the current employer. Is this OK.
I am really depending on you people's expertise. Any help will really make me confident about this change.
Regards
I would like to get you expert's opinion, before I pull the final string. My GC had been filed in EB2 with PD on Feb 26 2007. My 140 has been approved on April 2008. My 485 was filed during 2007 fiasco. I work for one of the big 3car company in Detroit as a consultant and situation is changing fast here, compelling me to search shelter somewhere else.
Luckily I got an offer from a new employer which is enticing me two pull the trick of Ac21. But before I do so, I would like to get your kind advise on the following points.
a) My Job title is programmer Analyst with my current employer but in the offer letter of the future employer is is given as "Sr. java developer". Does this title change matters? The new employer has agreed to give me the Ac21 letter with same job duty description.
b) The salary increase in the job is almost 50%. Do you think this causes any red flag.
c) The company size of the new employer is much small than the current employer. Is this OK.
I am really depending on you people's expertise. Any help will really make me confident about this change.
Regards
immigrationvoice1
12-08 01:25 PM
BTW, what are some of the online MS / MBA schools that the H1B community is attending ? Please share this information as I plan to take up one, and wanted to learn from your experirnce.
Thanks in advance.
Thanks in advance.
No comments:
Post a Comment